Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking an Structures Mechanic with commercial and regional jet C&D check experience for an opportunity in Atlanta, GA.   Job Description   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Duties and Responsibilites: - Repair body or structure of aircraft according to specifications. - Reinstall repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. - Read work orders, job instruction cards, blueprints, and specifications or examine sample or damaged parts or structures to determine repairs or fabrication procedures and sequence of operations. - Locate and mark dimension and reference lines on defective or replacement parts, using templates, scribes, compass, and steel rule. - Cure bonded structures, using portable or stationary curing equipment. - Communicate with other workers to fit and align heavy parts or expedite processing of repair parts. - Clean, strip, prime and sand structural surfaces and materials prior to bonding. - Repair or fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. - Remove or cut out defective parts or drill holes to gain access to internal defects or damages, using drill and punch. - Other duties may be assigned. Qualifcations and Requirements:  - Airframe and Powerplant license not required but must have at least 3-5 years aviation sheetmetal experience. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to accomplish any and all repairs, modifications, engineering orders, etc, with very little to no assistance.    - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)   - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver's license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Diesel Mechanic Shift 1st  Hours: 7am-330 pm  Pay: $24 - $28 per hour, depending on experience     MAJOR RESPONSIBILITY AREAS: - Tractor repairs - Trailer repairs - Support equipment repairs - Inspections (scheduled / unscheduled / DOT) DUTIES AND RESPONSIBILITIES - Perform inspections on company owned equipment - Sign off on DOT inspections - Perform DOT brake inspections and repairs (air brakes) - Repair air conditioning systems as needed - Charge parts out into the company's computer system - Read, troubleshoot, and repair electronic diesel engines - Read and understand equipment electrical circuits and diagrams - Troubleshoot and repair air brake systems - Be familiar with DOT out-of-service criteria - Know how to operate a torque wrench - Safely operate shop supplied heavy duty tools - Safely drive company owned equipment REQUIREMENTS - At least 1year experience in the operation and repair of tractor (class 8), and trailers (air brakes) inspection / repairs within a fleet, state, or federal (including Armed Forces) shop environment. Two year degree with a leading technical college in the repair of diesel engines is preferred.     All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations.   LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you’ve found an employer that can take you to new heights. 

General Laborer   LAUNCH Technical Workforce Solutions is seeking a General Laborer with experience performing general labor and maintenance tasks for an opportunity in Atlanta, GA.   Job Duties and Responsibilities:   Performs general manual labor tasks including loading, unloading, lifting, and moving materials. Assists a variety of functions with manual labor tasks as needed.      Qualifications and requirements: - Must be able to handle multiple tasks with minimal supervision. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.     Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.

Aircraft Support Mechanic (PFE) LAUNCH Technical Workforce Solutions is seeking Aircraft Support Mechanics with experience performing minor maintenance and repairs on commercial aircraft for an opportunity in Detroit, MI. Job Duties and Responsibilities: Aircraft Support Mechanics will perform various tasks that assist mechanics in technical functions related to aircraft seat checks, interior component changes in bins and galleys, installing and repairing carpeting, and blankets on commercial aircraft in compliance with policies, manuals, procedures and requirements. Qualifications and requirements: - Airframe and Powerplant license. - Avionics experience is preferred, but not required. - A minimum of one license is required along with the ability to secure the second license within 12 months of employment. - Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. - Must be able to multi-task and work under pressure. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have a valid drivers license. - Must have authorization to work in the U.S. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen, audiogram and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.

CNC Machinist  III   LAUNCH Technical Workforce Solutions is seeking a CNC Machinist with aerospace experience for an opportunity in Tucson, Arizona.   Job Duties and Responsibilities: - Knowledgeable of safety standards for equipment and demonstrate safe behaviors at all times - Maintains a clean and safe work area at all times - Complete required equipment maintenance checks - Knowledgeable of and adheres to company quality standards - Performs operations per specifications on drawing/print and documented procedures    - Must work well with others in a team environment - Monitor operations and quickly troubleshoot non-conformances as they occur - Produce and inspect parts at rate - Deburr parts using machines such as milling, drilling, grinding and other machines as needed - Identify parts clearly and accurately using vibropeen, electo chemical etching, cnc engraver, dotpeen, or equivalent - Hone parts utilizing vertical and horizontal honing machine - Machine parts on CNC Mill’s and Lathe’s - Perform SPC - Perform and record first piece inspection and fill out in-process inspection sheets - Assist others with machining problems. - Provide continuous improvement ideas/solutions. Participates in evaluation and implementation of improvement if appropriate. - Train others as directed - Provide direction and assist others with machining practices and issues - Set up proven and unproven jobs on CNC equipment, make approved adjustments, edit programs, set tooling requirements to turnover jobs to level I & II machinists if required Qualifications and requirements: - 1st shift opportunity. - Minimum of 5 years machining experience - Experience running and setting up CNC Lathe and CNC Mill - High School diploma or GED required - Must be able to read and write English - Application of machine shop theory and procedures, shop mathematics - Experience in reading, interpreting technical drawings, routers, work instructions and specifications. Able to create plan on how to machine based on information. - Advanced measurement skills for inspection, including GD&T, use of CMM, and optical comparator - Knowledge of cutting tool capabilities (speeds/feeds, types, insert grades, etc based on material and size) - Must be proficient in G & M codes, creating and editing CNC programs on lathes and mills, and setting up complex parts - Strong communication, critical thinking, and multi-tasking abilities - Train Level I and II machinists as directed - Monitor operations and quickly react and troubleshoot non-conforming operations as they occur - While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull, and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled - Work on feet for entire shift - Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically - Must be a U.S. Citizen - Proficient in MS Office (Excel and Word) - Working knowledge of CNC machine code and ability to change off sets - Must be able to set up proven jobs in established time - Must hold a Designated Quality Inspection (DQI) authority or have the prerequisite skills (drawing comprehension, geometric dimensioning and tolerancing, and inspection methodology) to become qualified within 6 months of hire. - Experience designing and creating tooling based on part geometry - Experience with spherical surfaces and threads and able to make machine adjustments to ensure parts meet specification - Some conventional machining experience   - College Course work preferred - Master Cam preferred - Preferred ability to set up and operate conventional, special purpose, and numerical control (NC) machines and machining centers to fabricate metallic and nonmetallic parts - Experience machining titanium and thin walled aluminum parts - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.       

CNC Machinist  II   LAUNCH Technical Workforce Solutions is seeking a CNC Machinist with aerospace experience for an opportunity in Tucson, Arizona.   Job Duties and Responsibilities: - Knowledgeable of safety standards for equipment and demonstrate safe behaviors at all times - Maintains a clean and safe work area at all times - Complete required equipment maintenance checks - Knowledgeable of and adheres to company quality standards - Performs operations per specifications on drawing/print and documented procedures - Must work well with others in a team environment - Monitor operations and quickly react to non-conformances as they occur - Produce and inspect parts at rate - Deburr parts using machines such as milling, drilling, grinding and other machines as needed - Identify parts clearly and accurately using vibropeen, electo chemical etching, cnc engraver, dotpeen, or equivalent - Hone parts utilizing vertical and horizontal honing machine - Machine parts on CNC Mill and Lathe’s - Perform SPC - Perform and record first piece inspection and fill out in-process inspection sheets - Assist others with machining problems - Set up proven jobs on CNC equipment, make minor approved adjustments, knowledge of tooling requirements Qualifications and requirements: - 2nd shift opportunity. - Minimum of 2 years machine shop experience - High School diploma or GED required - Must be able to read and write English - Application of machine shop theory and procedures, shop mathematics - Experience reading technical drawings and work instructions. - Demonstrated use and understanding of measuring & inspection - While performing the duties of this job, the employee may be required to bend, squat, sit, stand, walk, and handle objects. The employee is occasionally required to push/pull, and reach above shoulder level. The employee must be able to carry/lift up to 40 pounds and be able to rotate item being handled - Work on feet for entire shift - Manual dexterity and the ability to carry out complex, repetitive tasks quickly and methodically - Must be a U.S. Citizen - Working knowledge of MS Office (Excel and Word) - Working knowledge of CNC machine code and ability to change off sets - Must be able to set up proven jobs in established time - Conventional experience is a plus - Strong CNC Lathe skills preferred - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.       

Stores Clerk   LAUNCH Technical Workforce Solutions is seeking a Stores Clerk for an opportunity in Goodyear, AZ.   Job Duties and Responsibilities:   The Stores Clerk is responsible for receiving merchandise, unloading or unpacking it, marking it with codes to be identified, stocking shelves, and helping customers place orders.   Qualifications and requirements: - Basic computer knowledge required. - Strong organizational skills. - Must be able to lift 50 lbs. unassisted. - Warehouse experience (1-2 years) - Experience driving forklift - Must be able to successfully complete Forklift Training and Hazardous Material Certification/Training. - Must have excellent communication skills. - Must be a self-starter and ability to work with minimum supervision. - High school diploma or equivalent required. - Must pass pre-employment drug screen and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking  A&P Mechanics with commercial line service experience on Regional Jet aircraft for an opportunity in Albany, New York.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot REgional Jet aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - 10+ years repair experience on commercial aircraft. - Current A&P license required (6 months of documented experience within the last 2 years). - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. Pays $15-$36/hour, call to learn more about eligibility for travel expense reimbursement, bonuses, and fixed rate incentive opportunities. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Machinist   Job Summary: This position will be part of a team of machinists operating shop equipment to manufacture, repair and or restore airframe and engine parts to their original serviceable condition. Required to design and construct tooling when necessary. Practice safety conscious behaviors in all operational processes and procedures. Must be willing to work alternate shifts, off days and weekends as required. Particular functions, tasks, and requirements may vary depending upon the location and operational requirements. Must be able to work efficiently and be self motivated with little or no supervision. Practice safety-conscious behaviors in all operational processes and procedures. Job Qualifications: Two year post secondary Machine Tool Technology Certificate or 4 years precision machining experience in the set up and operation of Vertical, Horizontal, Jig and Boring Mills, Turret and Engine Lathes, I.D. and O.D. Grinders, Jig Grinders, Tool Grinders, Drill Presses and Radial Arm drills. Must be able to sharpen cutting tools and drills. Must know the use of and perform work using all types of machine shop measuring instruments. Must achieve a satisfactory score on the mechanical aptitude test which is structured to determine the ability to perform essential job functions. This shop is a 24x7 operation. Must be willing and able to work alternate shifts, off days, weekends and holidays as required to meet operational demand. Should demonstrate theoretical and working knowledge of jobs and skills performed in a machine shop. Must be able to read, write, comprehend and apply information contained in detailed and complex technical manuals, procedural manuals and blueprints with little or no assistance. Able to study, master and apply a series of steps, rules and guidelines needed to perform a variety of tasks. Able to respond with flexibility to change or multiple work assignments. Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. To qualify for this position you must:   Have a valid driver's license   Be at least 18 years of age   Be able to pass an extensive background check, drug test and audiogram   Be authorized to work in the US   Have the ability to work a flexible schedule including weekends and holidays .   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Minneapolis, MN.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on regional turboprop aircraft for an opportunity in Hayden, ID.   Job Duties and Responsibilities:   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - Entry level opportunity! - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on regional turboprop aircraft for an opportunity in Hayden, ID.   Job Duties and Responsibilities:   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - Must have 2+ years of experience performing structural repair on aircraft. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on regional turboprop aircraft for an opportunity in Hayden, ID.   Job Duties and Responsibilities:   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - Must have 5+ years of experience performing structural repair on aircraft. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on regional turboprop aircraft for an opportunity in Hayden, ID.   Job Duties and Responsibilities:   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - Must have 7+ years of experience performing structural repair on aircraft. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

A&P Line Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with line maintenance experience on Commercial aircraft for an opportunity in Anchorage, AK.   Job Duties and Responsibilities:   A&P Line Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft outdoors in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - 5+ years of commercial heavy check required. - Must have the minimum tools as required. - Must enjoy working outside in cold weather. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Minneapolis, MN.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Atlanta, GA.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Diesel Technician B-Level   Shift:  1st shift Sunday thru Thursday 6 am - 2:30 pm    Positions open: (3) Pay: $24 - $28 per hour, depending on experience   LAUNCH TransTechs is seeking a A-Level Diesel Mechanic to perform preventative maintenance tasks (brakes, tires, oil changes, etc.) on trucks and trailers in Minooka, IL.   Job Duties and Requirements: - Follows workplace and vehicle safety procedures consistently. - Able to perform proper Preventive Maintenance such as lube, filters, inspection, including truck appearance, interior and exterior, cab related safety and security. - Perform basic electrical repair and replace starters, alternators and batteries. - Perform tires tread, inflation, rotation, wear, reconditioning of wheels. - Inspect & replace basic engine components, transmission and clutch (R&R) and drive line components. - Remove and replace steering & chassis components. - Any other duties as assigned. Qualifications and Requirements: - Equivalent of high school diploma or GED and 3+ years of mechanic experience. - Must be eligible and able to obtain CDL withing 6 months of being hired. - Must have own tools. - Must have own steel toe boots. - Must have a valid driver's license. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.  

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with C&D check experience on Commercial aircraft for an opportunity in Fairbanks, AK.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - 5+ years of commercial heavy check required. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Aircraft Support Mechanic (PFE) LAUNCH Technical Workforce Solutions is seeking Aircraft Support Mechanics with experience performing minor maintenance and repairs on commercial aircraft for an opportunity in Seattle, WA. Job Duties and Responsibilities: Aircraft Support Mechanics will perform various tasks that assist mechanics in technical functions related to aircraft seat checks, interior component changes in bins and galleys, installing and repairing carpeting, and blankets on commercial aircraft in compliance with policies, manuals, procedures and requirements. Qualifications and requirements: - Airframe and Powerplant license. - Avionics experience is preferred, but not required. - A minimum of one license is required along with the ability to secure the second license within 12 months of employment. - Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. - Must be able to multi-task and work under pressure. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have a valid drivers license. - Must have authorization to work in the U.S. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen, audiogram and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.