Avionics Technican   Job Description: - Inspect, service, test, repair, remove and replace aircraft electrical instruments and electronic equipment, including: power system components, instrument systems, indicating and warning systems, aircraft automatic flight control systems, including auto-pilots, automatic flight stabilization, aircraft compasses and altitude reference systems, auxiliary power plants, airborne communication, navigation displays, etc. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Perform operational checks after maintenance is performed to ensure proper operation. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Primary Requirements/Preferences: - FAA Airframe and Powerplant license preferred. - Bench experience is needed (from electronic stores, etc. as they understand electronics at the bench level.) - Military Avionics Tech school ( back Shop Emphasis) - Electronic engineering technology - Electronics troubleshooting - FCC or other electronics focused licenses - 2 year electronics degree Experience may include, but is not limited to: - 2 year’s experience troubleshooting electronics down to component level on circuit cards. (eg. Resisters, capacitors, diodes, transistors, IC Chips,) - Working with electronic schematics. - Various meters and back shop measuring devices. - Oscilloscopes - Power supplies - Frequency generators and frequency counters - Automated test equipment (ATE) - Consumer electronics experience is valued. (TV’s, radios, and other circuit devices that contain electronic circuit cards) - Testing with specialized equipment. - High reliability solder under a microscope. Requirements: - A minimum of three years documented aircraft avionics systems experience or an associate degree in avionics from an approved technical school. - Must have 3-5 years experience within commercial aviation. - Prefer previous experience and qualifications associated with EWIS/SFAR88. - Must be able to read and write at a level to enable him/her to comprehend and apply information contained in technical manuals, blueprints and wiring diagrams. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - High School Diploma or equivalent. - Successful complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver's license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.  

GSE / Facilities Mechanic   LAUNCH Technical Workforce Solutions is seeking a GSE / Facilities Mechanic for an opportunity in Goodyear, AZ.   Job Duties and Responsibilities:   The GSE / Facilities Mechanic will help service and maintain, keeping in good order all Ground Service Equipment. As well as help with facility maintenance when required. - Operate and drive motorized and non-motorized equipment - Perform and show competence in preventive maintenance per established schedules on all ground support equipment. - Learn trouble-shooting and diagnostic assessment of ground support equipment as required. - Learn repairs and procedures to maintain all ground support equipment. - Remove malfunctioning ground support equipment from service and ensure GSE is not returned to service until malfunction has been properly diagnosed and repaired. - Own and demonstrate proper use of light hand tools. - Comply with all federal, provincial, municipal, airport authority and carrier security requirements. - Will retain a motor vehicle driver’s license for both air side / non airside in good standing at all times - Follow all safety guidelines set out by OSHA, EPA and management - Keep GSE shop and its equipment clean and serviceable at all times, report any and all deficiencies to management - Communicate with ramp management, customers and staff in a professional manner when needed Qualifications and requirements: - Willing to learn gas powered ground support equipment maintenance - Valid driver's license - Good oral and verbal communication skills - Strong organizational skills. - Must be able to lift fifty (50) pounds - Must be able to lift, bend, stoop, twist, kneel, crouch and stand for prolonged periods of time, as well as walk extended distances - Must be able to climb stairs, ladders and/service stands - Must have normal corrected hearing and vision - Must possess a valid driver’s license and ability to drive company vehicles. The candidates driving record will be examined for violations; results of which could render candidate ineligible for position. - High school diploma or equivalent required. - Must pass pre-employment drug screen and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Atlanta, GA.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Maintenance Utility Worker Job Duties and Responsibilities: Qualifications: Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. Requires high school diploma or G.E.D. Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. Must meet the physical requirements which qualify a person to perform essential job functions. Must be able to multi-task and work under pressure. To qualify for this position you must: • Have a valid driver's license • Be at least 18 years of age • Be able to pass an extensive background check, drug test and audiogram • Be authorized to work in the US • Have the ability to work a flexible schedule including weekends and holidays  Responsibilities:  The Maintenance Utility Worker (MUE1) will assist in the processing of aircraft parts to help support Engine Maintenance's goals and objectives. In addition, this worker maintains the physical condition of equipment / facilities. They utilize appropriate detergents, solutions, and media equipment to effectively and efficiently accomplish shop / aircraft related functions, such as but not limited to; parts transportation, parts cleaning and processing parts. Candidates will be required to learn all maintenance utility processes and functions within the shop and be willing to help out wherever necessary. Candidates must be able to learn and use Delta's computer MIRS/GEM functions applicable to perform assigned jobs. Must be a team player and active participant in identifying process improvements and cost saving initiatives. Practices safety-conscious behaviors in all operational processes and procedures.    All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH?   A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Aircraft Support Mechanic (PFE) LAUNCH Technical Workforce Solutions is seeking Aircraft Support Mechanics with experience performing minor maintenance and repairs on commercial aircraft for an opportunity in Atlanta, GA. Job Duties and Responsibilities: Aircraft Support Mechanics will perform various tasks that assist mechanics in technical functions related to aircraft seat checks, interior component changes in bins and galleys, installing and repairing carpeting, and blankets on commercial aircraft in compliance with policies, manuals, procedures and requirements. Qualifications and requirements: - Airframe and Powerplant license. - Avionics experience is preferred, but not required. - A minimum of one license is required along with the ability to secure the second license within 12 months of employment. - Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. - Must be able to multi-task and work under pressure. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have a valid drivers license. - Must have authorization to work in the U.S. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen, audiogram and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking an Structures Mechanic with commercial and regional jet C&D check experience for an opportunity in Atlanta, GA.   Job Description   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Duties and Responsibilites: - Repair body or structure of aircraft according to specifications. - Reinstall repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. - Read work orders, job instruction cards, blueprints, and specifications or examine sample or damaged parts or structures to determine repairs or fabrication procedures and sequence of operations. - Locate and mark dimension and reference lines on defective or replacement parts, using templates, scribes, compass, and steel rule. - Cure bonded structures, using portable or stationary curing equipment. - Communicate with other workers to fit and align heavy parts or expedite processing of repair parts. - Clean, strip, prime and sand structural surfaces and materials prior to bonding. - Repair or fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. - Remove or cut out defective parts or drill holes to gain access to internal defects or damages, using drill and punch. - Other duties may be assigned. Qualifcations and Requirements:  - Airframe and Powerplant license not required but must have at least 3-5 years aviation sheetmetal experience. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to accomplish any and all repairs, modifications, engineering orders, etc, with very little to no assistance.    - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)   - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver's license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Machinist   Job Summary: This position will be part of a team of machinists operating shop equipment to manufacture, repair and or restore airframe and engine parts to their original serviceable condition. Required to design and construct tooling when necessary. Practice safety conscious behaviors in all operational processes and procedures. Must be willing to work alternate shifts, off days and weekends as required. Particular functions, tasks, and requirements may vary depending upon the location and operational requirements. Must be able to work efficiently and be self motivated with little or no supervision. Practice safety-conscious behaviors in all operational processes and procedures. Job Qualifications: Two year post secondary Machine Tool Technology Certificate or 4 years precision machining experience in the set up and operation of Vertical, Horizontal, Jig and Boring Mills, Turret and Engine Lathes, I.D. and O.D. Grinders, Jig Grinders, Tool Grinders, Drill Presses and Radial Arm drills. Must be able to sharpen cutting tools and drills. Must know the use of and perform work using all types of machine shop measuring instruments. Must achieve a satisfactory score on the mechanical aptitude test which is structured to determine the ability to perform essential job functions. This shop is a 24x7 operation. Must be willing and able to work alternate shifts, off days, weekends and holidays as required to meet operational demand. Should demonstrate theoretical and working knowledge of jobs and skills performed in a machine shop. Must be able to read, write, comprehend and apply information contained in detailed and complex technical manuals, procedural manuals and blueprints with little or no assistance. Able to study, master and apply a series of steps, rules and guidelines needed to perform a variety of tasks. Able to respond with flexibility to change or multiple work assignments. Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. To qualify for this position you must:   Have a valid driver's license   Be at least 18 years of age   Be able to pass an extensive background check, drug test and audiogram   Be authorized to work in the US   Have the ability to work a flexible schedule including weekends and holidays .   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Machinist   Job Summary: This position will be part of a team of machinists operating shop equipment to manufacture, repair and or restore airframe and engine parts to their original serviceable condition. Required to design and construct tooling when necessary. Practice safety conscious behaviors in all operational processes and procedures. Must be willing to work alternate shifts, off days and weekends as required. Particular functions, tasks, and requirements may vary depending upon the location and operational requirements. Must be able to work efficiently and be self motivated with little or no supervision. Practice safety-conscious behaviors in all operational processes and procedures. Job Qualifications: Two year post secondary Machine Tool Technology Certificate or 4 years precision machining experience in the set up and operation of Vertical, Horizontal, Jig and Boring Mills, Turret and Engine Lathes, I.D. and O.D. Grinders, Jig Grinders, Tool Grinders, Drill Presses and Radial Arm drills. Must be able to sharpen cutting tools and drills. Must know the use of and perform work using all types of machine shop measuring instruments. Must achieve a satisfactory score on the mechanical aptitude test which is structured to determine the ability to perform essential job functions. This shop is a 24x7 operation. Must be willing and able to work alternate shifts, off days, weekends and holidays as required to meet operational demand. Should demonstrate theoretical and working knowledge of jobs and skills performed in a machine shop. Must be able to read, write, comprehend and apply information contained in detailed and complex technical manuals, procedural manuals and blueprints with little or no assistance. Able to study, master and apply a series of steps, rules and guidelines needed to perform a variety of tasks. Able to respond with flexibility to change or multiple work assignments. Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. To qualify for this position you must:   Have a valid driver's license   Be at least 18 years of age   Be able to pass an extensive background check, drug test and audiogram   Be authorized to work in the US   Have the ability to work a flexible schedule including weekends and holidays .   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Atlanta, GA.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Upholstery/Sewing Expert Technician   LAUNCH Technical Workforce Solutions is seeking a Upholstery/Sewing Expert Technician with repair experience on corporate aircraft for an opportunity in Grand Junction, CO   JOB SUMMARY This hourly, non-exempt full-time position requires a thorough understanding of aircraft interiors in addition to an advanced knowledge of upholstered items found in aircraft interiors. Modifications, sewing, repair, refurbishment and reinstallation of interior components are primary functions. Evaluate and adjust on modifications essential. Job duties will vary each day and are designated by the Upholstery Supervisor May be required to work independently. ESSENTIAL FUNCTIONS - Perform major modifications to seats and related items as required. - Possess a working familiarity with different seat styles typical to aircraft. - Work independently on projects when required. - Work independently when required. - Perform complete upholstery refurbishment of aircraft seats from start to finish. Such duties include inspection , disassembly and assembly, prep work, foam work, patterning, sewing and installation of dress covers. - Maintenance and repair of shop facility, equipment and tooling when required. - Cleanliness of shop and surroundings. - Assist with training to ensure job knowledge and performance of lesser-experienced employees. - Diagnose seat problems in and out of the aircraft and perform necessary corrective actions. - Possess a thorough understanding of FAA flammability requirements for all materials used. - Complete all required paperwork per work order book. - Any other job-related duties as assigned by supervisor or management. Experience     - Valid drivers license approved for airline travel and/or a valid passport is ideal, but not required - High school diploma or equivalent. - 3 - 5 years experience on aircraft upholstery. - Knowledge of materials and foams used in aviation. - Knowledge of repairs and techniques used on various seat styles. - 1 - 2 years heavy modifications preferred. - Must pass drug test and FAA background check. Responsibility         Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer oriented work habits. Perform major modification work. Training of lesser-experienced employees. Physical Requirements     Lift and carry at least 50 lbs. Routine walking, bending and squatting or sitting. Routing or repetitive physical motion with arms and hands with emphasis on grasping, feeling and finger dexterity. Stand for long periods. Mental Requirements      Understanding and implementation of regulations and guidelines including but not limited to OSHA, haz mat, etc. Communicate with employees, customers and vendors in a professional manner. Work with others in a professional manner. Research various items and fill out a work order book properly. Plan and organize procedures and operations. Supervision     Will work under supervision of assigned Team Leader and Interior Management. May be directed to supervise other technicians in some capacity. Work with no supervision when required. Working Conditions     The majority of work will be accomplished in a heated hangar or shop area. Work in aircraft on ramp on occasion., Varied positions in and around the aircraft. Equipment Used      Personal hand tools supplied by the technician. Electrical power tools such as sanders, saws, power drills, etc. Computer, copy machine, fax machine, etc. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. Pays $22-$40/hour, call to learn more about eligibility for travel expense reimbursement, bonuses, and fixed rate incentive opportunities.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Aircraft Support Mechanic (PFE) LAUNCH Technical Workforce Solutions is seeking Aircraft Support Mechanics with experience performing minor maintenance and repairs on commercial aircraft for an opportunity in Atlanta, GA. Job Duties and Responsibilities: Aircraft Support Mechanics will perform various tasks that assist mechanics in technical functions related to aircraft seat checks, interior component changes in bins and galleys, installing and repairing carpeting, and blankets on commercial aircraft in compliance with policies, manuals, procedures and requirements. Qualifications and requirements: - Airframe and Powerplant license. - Avionics experience is preferred, but not required. - A minimum of one license is required along with the ability to secure the second license within 12 months of employment. - Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. - Must be able to multi-task and work under pressure. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have a valid drivers license. - Must have authorization to work in the U.S. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen, audiogram and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Atlanta, GA.   Job Duties and Responsibilities:   A&P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Maintenance Utility Worker Job Duties and Responsibilities: Qualifications: Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. Requires high school diploma or G.E.D. Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. Must meet the physical requirements which qualify a person to perform essential job functions. Must be able to multi-task and work under pressure. To qualify for this position you must: • Have a valid driver's license • Be at least 18 years of age • Be able to pass an extensive background check, drug test and audiogram • Be authorized to work in the US • Have the ability to work a flexible schedule including weekends and holidays  Responsibilities:  The Maintenance Utility Worker (MUE1) will assist in the processing of aircraft parts to help support Engine Maintenance's goals and objectives. In addition, this worker maintains the physical condition of equipment / facilities. They utilize appropriate detergents, solutions, and media equipment to effectively and efficiently accomplish shop / aircraft related functions, such as but not limited to; parts transportation, parts cleaning and processing parts. Candidates will be required to learn all maintenance utility processes and functions within the shop and be willing to help out wherever necessary. Candidates must be able to learn and use Delta's computer MIRS/GEM functions applicable to perform assigned jobs. Must be a team player and active participant in identifying process improvements and cost saving initiatives. Practices safety-conscious behaviors in all operational processes and procedures.    All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH?   A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Diesel Fleet Mechanic   Pay: $24-$26 per hour, depending on experience *Current ASE Certification can increase pay   Shift: 1st Shift    ****Paid Time Off*** **Benefits Package****   Job Duties and Responsibilities: - Perform preventative maintenance and repairs on small fire truck engines, including, but not limited to welding. - May need to drive diesel equipment in/out of the shop or through facility parking lot. - Work in a safe manner, per company, local, state and federal policies and regulations. - Perform preventative maintenance, electrical, suspension, and airbrake repairs, and run diagnostics on the fleet. - Ability to speak, write and comprehend the English language in accordance with all safety-related regulations and product specifications to avoid product contaminations in addition to processing paperwork for invoicing, billing, etc. - Remove and replace steering & chassis components. - Other duties as required to support operations. Qualifications and Requirements: - The equivalent of High School Diploma or GED. - 1+ year's diesel mechanic experience in commercial or fleet maintenance and repair shop. - Must be able to pass a pre-employment physical and drug screen. - Have the ability to lift up to 50 pounds, spending time bending, climbing and stooping. - Must have own set of tools. - Must have a valid Driver's License. - Must have own steel toe boots. - CDL preferred or ability to obtain. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.

A&P Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Minneapolis, MN.   Job Description: - Inspect, test, repair, maintain, and service aircraft. - Read and interpret aircraft maintenance manuals and specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. - Modify aircraft structures, systems, or components, following drawings, engineering orders and technical publications. - Perform visual inspections during assembly of part and after repair or installation of component. - Perform operational checks after maintenance is performed to ensure proper operation. - Examine, inspect and troubleshoot engine or other components for cracks, breaks, or leaks. - Disassemble and inspect parts for wear, warping, or other defects. - Assemble and install electrical, plumbing, mechanical, hydraulic, and structural components and accessories, using hand tools and power tools. - Adjust, align, and calibrate aircraft systems, using hand tools, gauges, and test equipment. - Test engine and system operations, using testing equipment. - Service and maintain aircraft systems. - Perform maintenance IAW FAA approved technical data. - Research FAA technical data to locate applicable data relevant to assigned tasks. - Other duties may be assigned.   Requirements: - FAA Airframe and Powerplant license. - Must have 3-5 years experience within commercial aviation. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to document maintenance performed on required forms. - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.) - Familiar with B737, B747, B757, B767, B777, MD88/90, DC-9 and A319/320 aircraft types and associated engines. - Practice safety conscious behaviors in all operational processes and procedures. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver’s license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH provides you with a real benefits package, including access to company-sponsored medical/dental insurance and a 401k program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Maintenance Utility Worker Job Duties and Responsibilities: Responsibilities:  The Maintenance Utility Worker (MUE1) will assist in the processing of aircraft parts to help support Engine Maintenance's goals and objectives. In addition, this worker maintains the physical condition of equipment / facilities. They utilize appropriate detergents, solutions, and media equipment to effectively and efficiently accomplish shop / aircraft related functions, such as but not limited to; parts transportation, parts cleaning and processing parts. Candidates will be required to learn all maintenance utility processes and functions within the shop and be willing to help out wherever necessary. Candidates must be able to learn and use Delta's computer MIRS/GEM functions applicable to perform assigned jobs. Must be a team player and active participant in identifying process improvements and cost saving initiatives. Practices safety-conscious behaviors in all operational processes and procedures. Qualifications:   Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. Requires high school diploma or G.E.D. Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. Must meet the physical requirements which qualify a person to perform essential job functions. Must be able to multi-task and work under pressure. To qualify for this position you must:   Have a valid driver's license   Be at least 18 years of age   Be willing to submit an extensive background check, drug test and audiogram   Be authorized to work in the US   Have the ability to work a flexible schedule including weekends and holidays Comments/Special Instructions: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH?   A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Structures Mechanic   LAUNCH Technical Workforce Solutions is seeking an Structures Mechanic with commercial and regional jet C&D check experience for an opportunity in Atlanta, GA.   Job Description   Structures Mechanics will fabricate, repair, replace and rebuild aircraft parts and structures on commercial aircraft in compliance with policies, manuals, procedures and requirements.   Duties and Responsibilites: - Repair body or structure of aircraft according to specifications. - Reinstall repaired or replacement parts for subsequent riveting or welding, using clamps and wrenches. - Read work orders, job instruction cards, blueprints, and specifications or examine sample or damaged parts or structures to determine repairs or fabrication procedures and sequence of operations. - Locate and mark dimension and reference lines on defective or replacement parts, using templates, scribes, compass, and steel rule. - Cure bonded structures, using portable or stationary curing equipment. - Communicate with other workers to fit and align heavy parts or expedite processing of repair parts. - Clean, strip, prime and sand structural surfaces and materials prior to bonding. - Repair or fabricate defective sections or parts, using metal fabricating machines, saws, brakes, shears, and grinders. - Remove or cut out defective parts or drill holes to gain access to internal defects or damages, using drill and punch. - Other duties may be assigned. Qualifcations and Requirements:  - Airframe and Powerplant license not required but must have at least 3-5 years aviation sheetmetal experience. - Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. - Must be able to accomplish any and all repairs, modifications, engineering orders, etc, with very little to no assistance.    - Must be able to use the FAA approved data proficiently. (i.e., IPC, AMM, OHM, SRM.)   - Knowledge of design techniques, principles, tools and instruments involved in the production and use of precision technical plans, blueprints, drawings, and models. - High School Diploma or equivalent. - Successfully complete a fingerprint-based Criminal History Records check prior to beginning work. - Must meet the physical requirements which qualify a person to perform essential job functions including the ability to lift at least 70 pounds. - Must be willing to work rotating or fixed shifts. - A valid clear driver's license.   As required by the FAA for all persons in safety-sensitive positions, candidates selected for this position are subject to a drug test.   All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards. If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights. 

Maintenance Utility Worker Job Duties and Responsibilities: Responsibilities:  The Maintenance Utility Worker (MUE1) will assist in the processing of aircraft parts to help support Engine Maintenance's goals and objectives. In addition, this worker maintains the physical condition of equipment / facilities. They utilize appropriate detergents, solutions, and media equipment to effectively and efficiently accomplish shop / aircraft related functions, such as but not limited to; parts transportation, parts cleaning and processing parts. Candidates will be required to learn all maintenance utility processes and functions within the shop and be willing to help out wherever necessary. Candidates must be able to learn and use Delta's computer MIRS/GEM functions applicable to perform assigned jobs. Must be a team player and active participant in identifying process improvements and cost saving initiatives. Practices safety-conscious behaviors in all operational processes and procedures. Qualifications:   Must be able to read and write English and be able to comprehend and apply information contained in technical manuals. Requires high school diploma or G.E.D. Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. Must meet the physical requirements which qualify a person to perform essential job functions. Must be able to multi-task and work under pressure. To qualify for this position you must:   Have a valid driver's license   Be at least 18 years of age   Be willing to submit an extensive background check, drug test and audiogram   Be authorized to work in the US   Have the ability to work a flexible schedule including weekends and holidays Comments/Special Instructions: All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH?   A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

A&P Line Mechanic   LAUNCH Technical Workforce Solutions is seeking an A&P Mechanic with line maintenance experience on heavy commercial aircraft for an opportunity in Wilmington, Ohio.   Job Duties and Responsibilities:   A&P Line Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.   Qualifications and requirements: - 5+ years of A&P line maintenance experience on B767 aircraft. - Must have partaken in and possess copy of B767 Gen Fam. - Current A&P license required (6 months of documented experience within the last 2 years). - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen and background check.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status.   Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program.   Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.   

Aircraft Support Mechanic (PFE) LAUNCH Technical Workforce Solutions is seeking Aircraft Support Mechanics with experience performing minor maintenance and repairs on commercial aircraft for an opportunity in Seattle, WA. Job Duties and Responsibilities: Aircraft Support Mechanics will perform various tasks that assist mechanics in technical functions related to aircraft seat checks, interior component changes in bins and galleys, installing and repairing carpeting, and blankets on commercial aircraft in compliance with policies, manuals, procedures and requirements. Qualifications and requirements: - Airframe and Powerplant license. - Avionics experience is preferred, but not required. - A minimum of one license is required along with the ability to secure the second license within 12 months of employment. - Must possess basic understanding of mechanical, electrical, hydraulic and pneumatic disciplines as they apply to aircraft systems. - Must be able to multi-task and work under pressure. - Must have the minimum tools as required. - Must be willing to perform other functions and duties as assigned by managers and supervisors. - Must be willing to work any shift. - Must be willing to work overtime (as requested). - High school diploma or equivalent required. - Must have a valid drivers license. - Must have authorization to work in the U.S. - Must have reliable transportation to and from the job site. - Must pass pre-employment drug screen, audiogram and background check. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or veteran status. Why Choose LAUNCH? A team of aviation staffing experts leads LAUNCH. We understand the challenges of finding the top aviation jobs and we focus on linking you with the best openings in the most sought-after locations. LAUNCH offers you an ACA compliant benefit package including company-sponsored medical insurance with multiple plans to choose from. Our Minimum Essential Coverage is offered to every employee who does not have coverage elsewhere at no cost to you! LAUNCH also offers a 401(k) program with a company match. Plus, you join the LAUNCH Loyalty Club on your first day, earning you extra cash bonuses, apparel and safety rewards.   If you’re ready to LAUNCH your career, you've found an employer that can take you to new heights.